It's so easy to specify and order the right StudioPanel® kit. Just follow the easy steps listed below to insure that you're getting what you need. We are happy to help size the right kit for you, just give us a call.

Step 1

Determine the size of your studio

Step 2

Decide on the right StudioPanel® Kit from the Width x Length. The chart below determines which kit best suits the overall room size.

SP664 with added  optional panels. Please  call for details.

 

Step 3

If you have a hard ceiling, such as sheet rock or wood, we recommend applying additional CloudPanel™ units at the first reflection locations from the front speakers. With the SP442 and SP552 we recommend (1) Option C kit (2 CloudPanel™). With the SP664 we recommend (2) Option C kits (4 CloudPanel™).

Step 4

Do you want bass traps to clean up and tighten the low frequencies? A spring-loaded ported bass trap, the SpringTrap™, is our solution to very low frequency room resonance build-up in the range of 40 to 100 Hz. We recommend usage of this mode controller in the corners of the room. With the SP442 and SP552 recommend (2) Option S SpringTraps™. With the SP664 we recommend (4) Option S, SpringTraps™.

Step 5

Choose one from 6 standard fabric colors or one of the 42 optional special order colors,. There is an extra charge of 10% for this special handling. Please call us for approximate delivery time of special orders.

538 Silver Papier	481 Pearl	298 Medium Grey
150 Wedgewood	556 Deep Burgundy	408 Black

 

Pricing page.

Please contact us if you’d like assistance in the specification and ordering of your StudioPanel® kit. Once your order has been placed we will send you a Starter Pack. This contains a Level, Template, Instruction Manual, CD with set up/calibration details including software for use before and after installation. It's easy to find the correct position to place your StudioPanel®components. The panels should arrive at your shipping address, just about anywhere in the world, within 10-15 business days.